Version; W {Error|Remark|Suppress|Warn} [.Number; Werror-Limit Number; Wremarks - Analog Devices VISUALDSP++ 3.5 Manual

-version

The
-version
display its version information.

-W {error|remark|suppress|warn} [.number...]

The
-W {...} number
to override the specified diagnostic messages (errors, remarks, or warn-
ings). The
num
At compilation time, the compiler produces a number for each specific
compiler diagnostic message. The
nostic message number indicates that the diagnostic may have its severity
overridden. Each diagnostic message is identified by a number that is used
across all compiler software releases.

-Werror-limit number

The
-Werror-limit
imum number of errors for the compiler.

-Wremarks

The
-Wremarks
issue remarks, which are diagnostic messages that are even milder than
warnings.
You can invoke this switch by selecting the Enable remarks check
box in the VisualDSP++ Project Options dialog box, Compile tab,
Warning selection.

-Wterse

The (enable terse warnings) switch directs the compiler to issue
-Wterse
the briefest form of warnings. This also applies to errors and remarks.
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
for ADSP-219x DSPs
(display compiler version) switch directs the compiler to
(override error message) switch directs the compiler
argument specifies the message to override.
(maximum compiler errors) switch lets you set a max-
(enable diagnostic warnings) switch directs the compiler to
(discretionary) string after the diag-
{D}
Compiler
1-49