Path {-Asm | -Compiler | -Def | -Lib | -Link | -Mem} Filename; Path-Install Directory; Path-Output Directory; Path-Temp Directory - Analog Devices VISUALDSP++ 3.5 Manual

-path {-asm | -compiler | -def | -lib | -link | -mem} filename

The (tool location) switch directs the compiler to use the specified
-path
component in place of the default-installed version of the compilation
tool. The component should comprise a relative or absolute path to its
location. Respectively, the tools are the assembler, compiler, driver defini-
tions file, librarian, linker or memory initializer. Use this switch when you
wish to override the normal version of one or more of the tools. The
switch also overrides the directory specified by the
(on page 1-39).

-path-install directory

The
-path-install
use the specified directory as the location for all compilation tools instead
of the default path. This is useful when working with multiple versions of
the tool set.
You can selectively override this switch with the
switch.

-path-output directory

The
-path-output
piler to place output files in the specified directory.

-path-temp directory

The
-path-temp
place temporary files in the specified directory.
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
for ADSP-219x DSPs
(installation location) switch directs the compiler to
(non-temporary files location) switch directs the com-
(temporary files location) switch directs the compiler to
Compiler
-path
switch
-path-install
-path-tool
1-39