Debug-Types <File.h; Default-Linkage-{Asm|C|C; Dry - Analog Devices VISUALDSP++ 3.5 Manual

constant, it must be surrounded by escaped double quotes. Note that the
compiler processes
fine macro) switches.
This switch can be invoked with the Definitions: dialog field
located in the VisualDSP++ Project Options dialog box, Compile
tab, Preprocessor category.
-debug-types <file.h>
The
-debug-types
writing a complete set of debugging information for the header file. The
option (on page
-g
switch because it is implied. For example,
cc219x -debug-types anyHeader.h
The implicit
-g
that are referenced in the program. The
typedefs
provides complete debugging information for all

-default-linkage-{asm|C|C++}

The
-default-linkage-asm
linkage)/
-default-linkage-C++
to set the default linkage type. C linkage is the default type in C mode,
and C++ linkage is the default type in C++ mode.
This switch can be specified in the Additional Options box located
in the VisualDSP++ Project Options dialog box, Compile tab,
General category.

-dry

The (verbose dry-run) switch directs the compiler to display main
-dry
driver actions, but not to perform them.
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
for ADSP-219x DSPs
switches on the command line before any
-D
switch provides for building an
1-28) need not be specified with the
option writes debugging information for only those
(assembler linkage)/
(C++ linkage) switch directs the compiler
Compiler
-U
file directly and
*.h
-debug-types
option
-debug-types
and
typedefs structs
-default-linkage-C
(unde-
.
(C
1-25