Compiler Command-Line Switches; C/C++ Compiler Switch Summaries - Analog Devices VISUALDSP++ 3.5 Manual

Compiler Command-Line Interface
on page 1-12. The Additional options field in each sub-page is used to
enter the appropriate file names and options that do not have correspond-
ing controls on the Compile tab but are available as compiler switches.
Use the VisualDSP++ context-sensitive online Help to get information on
compiler options you can specify in VisualDSP++.

Compiler Command-Line Switches

This section describes the command
piling. It contains a set of tables that provide a brief description of each
switch. These tables are organized by type of a switch. Following these
tables are sections that provide fuller descriptions of each switch.

C/C++ Compiler Switch Summaries

This section contains a set of tables that summarize generic and specific
switches (options).
• "C or C++ Mode Selection Switches"
• "C/C++ Compiler Common Switches"
• "C++ Mode Compiler Switches"
A brief description of each switch follows the tables, beginning on
on page 1-21.
1-12
-l
VisualDSP++ 3.5 C/C++ Compiler and Library Manual
ine switches you can use when com-
in Table 1-3 on page 1-13
in Table 1-4 on page 1-13
in Table 1-5 on page
for ADSP-219x DSPs
1-20.