Calling Two Others At The Same Time; Calling Two Others Simultaneously - TANDBERG MXP User Manual

What's in this guide?

Calling two others at the same time

Non-MultiSite systems only!
T
he MultiSite capability is an optional
feature in many TANDBERG
systems. This feature gives you the
possibility of arranging video meetings
by calling several others and have you
all connected together simultaneously.
For more on this, see About video
conferences.
Video systems not equipped with
MultiSite may still call another party
when already in a call.
Thus you may even here have two
calls running at the same time. Note
that the two parties will not be able to
communicate with each other, only with
you and only one at a time. The feature
requires H.323 or SIP to work.
If you are not sure whether your system
has this feature, contact your system
administrator.
When you make an additional call, the
party called first will be temporarily
suspended. The message "Please wait"
will appear on the screen of the party
suspended.
You may switch between the two
parties you have called by navigating to
the lowermost line in the main menu as
shown on this page.
This feature is not available on systems
with MultiSite installed.
Both calls made must be SIP or H.323
in order to make this feature work. This
feature is available on non-MultiSite
systems only. If in doubt, ask your
system administrator.
D1403405 USER GUIDE VIDEO ENDPOINTS MXP ENGLISH—SEPTEMBER 2009
Getting started Making calls Making calls Using the phone book

Calling two others simultaneously ...

If you select Add
another Call
during a call (press
the OK key on the
remote control
during the call)
and then
press the OK
key again...
... the call currently active will be
temporarily be set On Hold, which
can be seen from this line.
To switch To terminate just one
between the of the calls, use the
two parties, Arrow keys to navigate
navigate to that number and
down to press the red End Call
this line and key on the remote
press the control. If you want to
OK key on terminate both calls at
the remote the same time, press
control. the red End Call key
again.
26
In-call features Video conferencing
Call the second party
manually or by means of
the phone book in the usual
manner.
To end any or both of the calls,
press the End Call button on
the remote control. The menu
will then look something like
this...