Konica Minolta bizhub 350 Operations page 449

You can specify the time until a timeout of the SMTP server connectio
curs when receiving e-mail messages.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on
right refer to the descriptions of the corresponding functions.
Bit Description
7, 6, 5, 4 Specifies the time until a
timeout of the SMTP server
connection occurs when
sending e-mail messages.(*)
3, 2, 1, 0 -----------------------------
(*)
After changing the settings, the machine must be turned off, then on
Reminder
When turning the machine off, then on again, wait about 10 seconds
turning the machine off before turning the machine on again. The se
may not be applied correctly if the machine is turned on immediately
it is turned off.
7654 3210
0010 0000 (HEX: 20)
Setting Description
0001 30 seconds
0010 60 seconds
0011 90 seconds
0100 120 seconds
0101 150 seconds
0110 180 seconds
0111 210 seconds
1000 240 seconds
1001 270 seconds
1010 300 seconds
Other * Do not specify other set-
tings than the above.
*
0000 Do not change these bits.
Pa
re
en
---
---