Konica Minolta bizhub 350 Operations page 194

4 Transmission result
5 Transmission Image
Resending
You can resend up to 20 failed transmission.
1
Touch [Job List], then [Type], and then select the document that coul
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the docu
ment does not need to be scanned again.
2
To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
Shows the transmission result. Any of the
following may appear.
OK: The transmission was completed suc-
cessfully.
INTERR: The transmission was interrupted
F. MEM: The memory capacity was exceed
ed.
NG: The transmission failed.
PT. DEL: The transmission to some destina
tions failed.
Error code: For details, refer to "Network e
ror list" on page 12-4.
Prints a part of the sent image.