Konica Minolta bizhub 350 Operations page 269

You can add the following functions by pressing the [Fax/Scan] key on
control panel, then touching [Menu] on the screen that appears.
Note
The following functions have no effect, even if settings have been s
fied.
- "File name" on the Network tab
- "E-Mail Notification" on the Network tab
Item
Setting 1 TSI
Dest. Insert
TX Report
2in1
2-Sided TX
Rotation TX
Setting 2 Priority TX
Timer TX Setting
Stamp
Description
Prints the entered text such as the name, fax number, an
dress at the top of the output page. For registering the tra
sion source, refer to "Registering transmission source na
on page 10-4.
Select whether to print the destination at the top of the p
Prints the name of the destination registered to a one-to
key.
Select under which conditions the transmission report is
output.
Default: Outputs according to the specifications of the ad
trator.
ON: Prints regardless of the transmission results.
If TX Fails: Prints only when undeliverable.
OFF: Does not print regardless of the transmission resul
Select whether to send using the 2in1 function (printing
pages to fit on one page).
Select whether to perform double-sided transmission. Y
specify the position of the binding margin and the docum
entation.
Select whether to rotate the image according to the pap
entation of the receiving machine.
The quality can be specified as 200 dpi or less when send
size.
Select whether a job is given priority over others.
Select whether to set the send time. Specifies the send
when "ON" is selected.
Specify whether the document is stamped to indicate tha
been scanned. The document must be loaded into the A
Note
To use the Stamp function, optional stamp un
must be installed.