Konica Minolta bizhub 350 Operations page 365

The device name of this machine used in the file name and the transmi
of the scanned data can be specified.
Settings can be specified for the following.
Item
Machine Name
Division by
Page
Division by Size
Size of Division
Interval of Divi-
sion Transmis-
sion
E-mail Mode
TX Quality
(Max.)
TX Size (Max.)
Coding Method
Scan Mode
B/W: File Type
B/W: Coding
Method
Description
Enter the device name of this machine that is used for the file name. Up
characters can be entered.
Applied when performing the Scan to E-Mail or Internet fax operation.
Select whether the data is divided by page when scanned data is sen
Applied when performing the Scan to E-Mail operation.
Select whether the data is divided by a fixed size when scanned data
Note
Depending on the e-mail software used by the recipient,
nary division ("Division by Size") may not be available.
When "Division by Size" is set to "On", type in the size of the data sec
(between 16 and 2000 KB)
When "Division by Size" is set to "On", type in the number of seconds
tween 1 and 255) for the interval when the divided data is sent.
Select the maximum resolution ("200 dpi", "400 dpi" or "600 dpi") for th
to be sent as an Internet fax.
Select the maximum document size ("Letter", "Legal" or "11*17") for th
to be sent as an Internet fax.
Select the coding method ("MH", "MR" or "MMR") for the data to be s
an Internet fax. The data amount for the coding methods increase as fo
MMR, MR, MH.
Select the format ("TIFF" or "PDF") of the data that is to be saved whe
forming the Scan to E-Mail, Scan to FTP, Scan to SMB, or Scan to HD
eration.
If "TIFF" was selected, the setting changes to "Multi Page TIFF" with th
to FTP, Scan to SMB or Scan to HDD operation.
Select the coding method ("MH" or "MMR") for the data to be sent wh
forming the Scan to E-Mail, Scan to FTP, Scan to SMB, or Scan to HD
eration. The data amount with the MMR coding method is less than w
MH method.