Aspect Ratio - Jensen VM9114 Operating Instructions Manual

Aspect Ratio

Press and hold the WIDE button (4) on the monitor to adjust the aspect ratio
as follows:
Image/Display Settings
Video Output Modes
Table 1 shows the video output mode for each playing source.
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the following steps:
1. Press the PIC button on the monitor (2) repeatedly to move from the
"BRIGHT" setting to "CONTRAST".
2. Turn the rotary encoder to adjust the setting level.
FULL
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
NORMAL
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
STANDBY
Screen becomes black. Touch
screen to resume.
Table 1: Video Output Modes
Playing Source Video Output Modes
RGB Mode
RGB Mode
CVBS Mode
6
VM9114