Jensen VM9114 Operating Instructions Manual page 18

To reset the password, access the "RATING" menu and enter the current
password. Once the correct password is entered, you can access the
"Password" field and enter a new one.
NOTE: Record the password and keep it in a safe place for future
reference. The rating for each disc is marked on the disc, disc packing,
or documentation. If the rating is not available on the disc, the parental
lock feature is unavailable. Some discs restrict only portions of the disc,
allowing the appropriate content will play. For details, please refer to the
disc description.
Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor
is retracted inside the unit, the TFT monitor automatically moves into the
viewing position and Camera mode is selected upon shifting into REVERSE
gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside
unit.
Setting Options
TFT Auto On
Open
Off
Manual
Video NTSC
Input
PAL
(Input cir-
cuitry
Auto
autode-
tects the
video sig-
nal from
the Aux In
source).
If the monitor is in display mode, the monitor automatically switches to
CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
The TFT panel automatically opens when the unit is turned
on.
You must press the OPEN button (1) to open the TFT panel.
When the ignition is turned OFF, the TFT panel DOES NOT
retract if it was previously out
The color signals are output in the standard NTSC format.
The color signals are output in the standard PAL format.
The color signal output is switched automatically based on
the current video input signal - NTSC or PAL.
14
Function
VM9114