Jensen VM9114 Operating Instructions Manual page 39

VM9114
Problem
Prolonged Improper aspect ratio
image or setup
improper
height/width
ratio display
Monitor stops Moving path is blocked
at incorrect
position
TUNER
Weak station Auto antenna is not fully
searching extended
Auto antenna not properly
connected
LOCAL function is acti-
vated
DISC
Cannot insert Disc already inside unit
disc
Image blurred, Disc is illegally copied
distorted, or
dark
Disc does not Disc is warped or
play back scratched
Disc is dirty or wet
Laser pickup is dirty
Incompatible disc is used
Disc rating exceeds
Parental Lock rating limit
Disc region code is not
compatible with unit
Disc is inserted upside
down
PBC cannot be PCB is not available on
used during the disc
VCD playback
No repeat or PCB is on
searching
while playing
VCD
MP3
Table 6: Troubleshooting
Cause
Use correct aspect ratio setting
Press OPEN key to restart monitor
movement
Connect the auto antenna control cable
properly
Connect the auto antenna control cable
properly
Turn LOCAL function off
Eject current disc and insert new one
Use original disc
Use disc in good condition
Clean disc with soft cloth
Clean laser pickup with cleaning disc
Use compatible disc
Change Parental Lock settings to lower
restriction
Use disc with proper region code
Insert disc with label side up
Turn PCB off
35
Corrective Action