Subscribe to Our Youtube Channel
Related Manuals for All-Power APG3090
Summary of Contents for All-Power APG3090
-
Page 2: Table Of Contents
IN THIS MANUAL BEFORE OPERATING. FAILURE TO COMPLY WITH INSTRUCTIONS IN THIS MANUAL COULD RESULT IN PERSONAL INJURY, PROPERTY DAMAGE, AND/ OR VOIDING OF YOUR WARRANTY. ALL-POWER WILL NOT BE LIABLE FOR ANY DAMAGE BECAUSE OF FAILURE TO FOLLOW THESE INSTRUCTIONS. -
Page 17: Controls
Owner’s Manual Controls (cont) Switch Position The voltage selector switches the main power carrying windings of the generator to produce 120V ONLY or 120/240V. 120V ONLY: ONLY the 120V receptacles can be used. Do not use the 120/240V receptacle in this position. -
Page 19: Pre-Operation Check
Owner’s Manual Operation OIL FILLER CAP OIL FILLER HOLE Pre-Operation Check 1. Remove the oil filler cap and wipe the dipstick clean. 2. Check the oil level by inserting the dipstick into the filler neck without screwing it in. 4. If the level is low, fill to the top of the oil filler neck with the UPPER LEVEL recommended oil. -
Page 30: Assembly
10,000W Generator Assembly Battery Installation 1. Remove the cover under the panel as shown. 2. Screw on one bolt to rivet the battery and screw the bolts to close up the plate as shown below. -
Page 32: Compliance
10,000W Generator Compliance UNITED STATES ENVIRONMENTAL PROTECTION AGENCY, WASHINGTON, DC 20460 2007 Model Year Certifcate of Conformity • Manufacturer: Chongqing Dajiang Power Equipment Co. Ltd. • Certificate Number: CDP-NRSI-07-01 • Effective Date: 5/31/2006 • Date Issued: 5/31/2006 Merrylin Zaw-Mon, Director, Compliance and Innovation Strategies Division, Office of Transportation and Air Quality.
Need help?
Do you have a question about the APG3090 and is the answer not in the manual?
Questions and answers