Assembling Your Cuisinart Juicer - Cuisinart JEX-450A Instruction Booklet

26675 JEX-450A IB 23/6/08

Assembling Your Cuisinart Juicer

NOTE: The juice extractor will not operate
until the pulp container is locked into
position. To assemble this unit the
following steps must be followed in the
order given.
Step 1
Place filter bowl on top of the motor
housing.
Step 2
Place the stainless steel filter basket
inside the centre of the filter bowl. Make
sure it snaps into hub. Press firmly on the
stainless rim of the filter basket. To avoid
injury do not press on shredder disk.
Note: Before switching the juicer on,
ensure the stainless steel filter basket is
pushed down firmly until it clicks into place.
Step 3
Place the Juicer top cover over the
top of the motor housing by positioning
it over the centre of the filter and lower
into position.
Step 4
Lock juice cover into place by turning
left to right (counterclockwise) until cover
locks into position. Follow instructional
arrows on top cover.
Step 5
Slide the food pusher down the feed chute
by aligning the flat area of the food pusher
with the flat area of the feed chute. Food
pusher is marked with an arrow for easy lineup.
Continue to slide the food pusher down the feed chute.
11:59 AM Page 8
7
Step 1 and 2
Step 3
Step 4
Step 5