Blind Transfer; Multiple Handset Use - AT&T CRL81112 Complete User's Manual

Multiple handset use

Options while on calls

Blind transfer

While on an outside call, you can transfer it
handset. This feature is not available for model CRL81112 unless you purchase
an accessory handset (AT&T model CRL80112).
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/
2. Press /SELECT to choose >Transfer.
MENU
• If you have a two-handset system, the outside call is put on hold and your
handset screen shows Transferring call... The other handset rings and its
screen shows Transfer from other handset.
• If you have more than two handsets, your screen shows TRANSFER TO:
Use the dialing keys to e e nter a specific handset number (1-9 for handsets
TONE followed by 0-2 for handsets 10-12, or TONE followed by #
1-9,
for all handsets),
and press
screen shows Transferring call... or Transferring call to all...
handset(s) rings and shows Transfer from HANDSET X
handset number).
3. To answer the call on the destination handset, press
/SPEA�ER SPEA�ER, any dialing key (0-9, TONE , or
shows Call transferred and goes to idle mode.
NOTES:
• To cancel the transfer and return to the external call before the blind transfer call is answered, press
/CANCEL on your handset.
OFF
• If the other handset does not answer the transfer within 30 seconds, the transfer ends and the
original handset rings while showing No response to transfer. If the original handset does not pick
up within 30 seconds, the handset returns to idle mode and the outside call ends.
or press
/SELECT. The outside call is put on hold and your handset
MENU
to a specific handset or any
.
SELECT
q or p
to scroll to the desired handset
CID DIR
25
(X represents the
, press PHONE/
#). The original handset
The other
,
FLASH