Static Route - D-Link DSL-2640BT User Manual

Web Configuration

Static Route

Choose ADVANCED > Routing and click Static Route. The page as shown in the figure
appears. This page displays the information of existing static routes.
Click Add and the page as shown in the figure appears.
The table describes the parameters in this page.
Field
Destination Network
The destination IP address of the device.
Address
Subnet Mask The subnet mask of the destination IP address.
Use Gateway IP
The gateway IP address of the device.
Address
Select the interface of the static routing used by the
Use Interface
device from the drop-down list.
Note:
You can enter the gateway IP address of the device in the Use Gateway IP
Address field or set the User Interface, but cannot apply the two settings at the
same time.
Click Apply to save the settings.
D-Link DSL-2640BT User Manual
Description
65