Web Configuration
System Log
Choose MAINTENANCE > System Log. The SYSTEM LOG page as shown in the figure
appears.
In this page, you can enable the log function. You can set Mode to Local, Remote, or
Both. Local indicates to save the log in the local computer. Remote indicates to send the
log to the remote log server. Both indicates to save the log in the local computer and the
remote log server.
To log the events, do as follows:
Step 3 Select Enable Log.
Step 4 Select a mode from the drop-down list.
If you select Remote or Both, enter the IP address and port number of the
server.
Step 5 Click Apply to apply the settings.
Step 6 Click View System Log to view the detail information of the system log.
D-Link DSL-2640BT User Manual
75