Upnp; Adsl Settings - D-Link DSL-2640BT User Manual

Web Configuration

UPnP

Choose ADVANCED > Network Tools and click UPnP. The page shown in the following
figure appears.
In this page, you can configure universal plug and play (UPnP). The system acts as a
daemon after you enable UPnP.
UPnP is used for popular audio visual software. It allows automatic discovery of your
device in the network. If you are concerned about UPnP security, you can disable it.
Block ICMP ping should be enabled so that the device does not respond to malicious
Internet requests.
Click Apply to save the settings.

ADSL Settings

In the NETWORK TOOLS page, click ADSL. The page as shown in the figure appears.
In this page, you can select the ADSL modulation. Normally, you are recommended to
keep the factory defaults. The device negotiates the modulation mode with the DSLAM.
Click Apply to save the settings.
D-Link DSL-2640BT User Manual
62