Indicators And Projector Condition - Eiki LC-HDT700 Owner's Manual

Check the indicators for the projector condition.
The projector is operating normally .
Indicators
LAMP/
POWER
SHUTTER
REPLACE
green
red/blue
orange
❖
❖
❊
❖
❖
❖
❊
❊

Fig .1 Filter replacement icon and
Please wait . . ..
• • • on
• • • on (red)
❖
• • • on (blue)
❊
• • • dim
• • • dim (red)
❖

Indicators and Projector Condition

LAMP WARNING
WARNING
FILTER TEMP.
orange red


 













• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • blinking at the normal
❊
rate (blue and dim red)
(approx. 1 second ON, 1
second OFF)
• • • off
• • • Differ according to conditions.

Projector Condition
The projector is off. (The AC power cord is
unplugged.)
The projector is in stand-by mode. Press the ON/

STAND-BY button to turn on the projector.
The projector is operating normally.

(The shutter is open)
The projector is operating normally.

(The shutter is closed)
The projector is preparing for stand-by or the
projection lamp is being cooled down. The
projector cannot be turned on until cooling is

completed and the POWER indicator lights
green.
The projection lamp is being cooled down in the

Power management mode.
The projector is in the Power management mode.

The projection lamp is being cooled down in the
Shutter management mode.
The projector is in the Shutter management
mode. Press the ON/STAND-BY button to turn
on the projector.
The filter is scrolled using the FILTER button on

the remote control or the Filter control function
in the setting menu. When the filter is being
scrolled, the Filter replacement icon and Please
wait . . . message (Fig. 1) appear on the screen for
about 30 seconds.
• • • blinking fast (approx. 0.5 seconds
ON, 0.5 seconds OFF)
• • • blinking fast (blue and dim red)
❊
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • blinking slow (approx. 2 seconds
ON, 2 seconds OFF)
Appendix
85