Pointer Function; Wireless Mouse Operation - Eiki LC-HDT700 Owner's Manual

You can move the Pointer of the projector with the remote control to emphasize a part of the projected
image.
Press the POINTER button to activate the Pointer
1
function.
Use the MOUSE POINTER button to move the
2
Pointer.
To cancel the Pointer function, press the POINTER
3
button again or press any other button.
Arrow
Dot

Note:
You can choose the pattern of Pointer (Dot/Arrow/
Finger) in the Setting Menu (p.64)
The remote control can be used as a wireless mouse for your computer.
1 Before operating the wireless mouse, connect your computer and the projector with a USB cable
(p.20).
When the Pointer function is used, the wireless mouse is not available.
2
When a USB cable is connected to the computer and the projector, turn on the projector first, then
the computer. If you turn on the computer first, the wireless mouse function may not operate properly.
L-CLICK button
Acts as left (click)
mouse button
while the projector
and a computer
are connected
with a USB cable.

Pointer Function

Finger

Wireless Mouse Operation

Basic Operation
MOUSE POINTER button
Move the pointer on the
screen with this button.
R-CLICK button
Acts as right (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
MOUSE POINTER
button
POINTER
button
31