Eiki LC-HDT700 Owner's Manual page 44

Computer Input
Custom adj .
Adjust the screen scale and position manually with this
function.
Press the Point ► button or the SELECT button at
Custom adj . and Custom adj . is displayed on the screen,
you can use the Point ▲▼ buttons to choose the item you
want to adjust.
Scale H/V ........ Adjust the Horizontal/Vertical screen
scale.
H&V ................. When set to On, the aspect ratio is fixed.
Scale V appears dim and becomes
unavailable. Adjust Scale H, and
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ... Adjust the Horizontal/Vertical screen
position.
Common ......... Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at yes.
When Custom is selected, the saved
scale is used.
Reset ............... Reset all the adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears
and D . zoom + appears. Press the SELECT button to
expand the image size. Use the Point ▲▼◄► buttons to
pan the image. The Panning function can work only when
the image is larger than the screen size.
You can also enter the Digital zoom + mode by pressing
the D.ZOOM button on the remote control.
Digital zoom -
Select Digital zoom – . The On-Screen Menu disappears
and D . zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM button on the remote control.
You can also enter the Digital zoom - mode by pressing
the D.ZOOM button on the remote control.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment Menu or select
an input source from the Input Source Selection Menu
(see pages 32-34) again or adjust the screen size with
the D.ZOOM button.
44
Custom adj .
Note:
• When no signal is detected, Normal
is set automatically and the Aspect
dialog box disappears.
• The adjustable range for Scale H/V
and Position H/V is limited depending
on the input signal.
Note:
• The panning function may not operate
properly if the stored Mode in the PC
adjust Menu is used (p.38).
• The minimum compression ratio is
limited depending on the input signal,
when the Keystone function is working
or when the custom is selected for the
screen size.
• True and Digital zoom +/– cannot
be selected when 480i, 575i, 480p
or 575p is selected in the PC System
Menu (p.35).
• Digital zoom +/- cannot be selected
when True is selected.
• Digital zoom – cannot be operated
when Custom is selected.