Eiki LC-HDT700 Owner's Manual page 58

Setting
Frame lock
Set the Frame Lock to Main picture or Sub picture.
Reset
Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at
yes.
Mode free
Delete the data stored in the Mode and return to Free. Use
the Point ▲▼ buttons to select Mode free and press the
SELECT button to show the Where to free? dialog box.
Move the highlight to one of the mode (User 1 - 5) which
you want to delete and press the SELECT button. Then the
confirmation box appears. To delete, select yes.
Store
Store the adjusted data in the User 1-5. Use the Point
▲▼ buttons to select Store and press the SELECT
button to show the Where to store? dialog box. Move the
highlight to one of the mode (User 1 - 5) which you want to
store and press the SELECT button. Then the confirmation
box appears. To store adjusted data, select yes.
Edge blending
This function allows multiple projector images to be
seamlessly overlapped.
Use the Point ▲▼ buttons to select Edge blending and
then press the SELECT button to display a dialog box.
Use the Point ▲▼◄► buttons to adjust the setting value.
On/Off .......... Set to On to activate the Edge blending
function.
Start ............. The point at which edge blending starts.
The edges of a green frame around an
image shift in accordance with the values
specified here. Specify a value in the 0 - 960
range for Left and Right and a value in the
0 - 540 for Top and Bottom.
Width ............ Adjusts the width of correction.
Right/Left: Set the width. (from 0 to 960).
Top/Bottom: Set the width. (from 0 to 540).
Black level ... Adjusts the black level of projected image.
All: The values of R, G, and B will be
R/G/B: Adjusts the value (up to ± 127).
Test pattern . Select On to display a suitable pattern
(white: 50%).
Menu off ....... Closes the menu and hides all edge lines
(in green, red, and gray) temporarily.
Reset ............ Select Reset and press the SELECT button.
Then Return to factory default of Edge
Blending? message appears . To reset,
press the SELECT button at yes.
Back ............. Hides the Edge blending setting menu and
returns to the Setting menu.
58
changed simultaneously.
To store the adjusted data .
Return to Picture in Picture menu.
Stored data
Vacant