Eiki LC-HDT700 Owner's Manual page 41

MENU
Return to the IMAGE ADJUST Menu. Any settings that
have been changed will not be stored. To store the
changed settings, be sure to select LIST and go to the
COLOR MANAGEMENT LIST.
4
In the COLOR MANAGEMENT LIST, the adjusted
color data are checkmarked. You can decide whether
or not to apply the adjusted color data in the list to the
projected image (see below).
LIST MODE
Clear the check mark if you do not want to apply
the adjusted color data; select the check mark and
then press the SELECT button. The check mark
disappears.
COLOR PALETTE
Return to the COLOR SELECTION mode so that you
can readjust the setting for the color in that line. (This
option is not available if the check mark is cleared.)
DEL
Select the DEL box if you want to delete the adjusted
data. Press the SELECT button and a confirmation
box appears and then select yes.
ALL DEL
Delete all the data in the list. Press the SELECT button
and a confirmation box appears and then select yes.
MENU
The same function as stated above.
COLOR M .
The same function as stated above.
Color temp .
Use the Point ◄► buttons to select the desired Color
temp. level (High, Mid, Low or XLow).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the
Point ► button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
Computer Input
COLOR SELECTION MODE
Level and phase
adjustment palette.
LIST COLOR M .
LIST MODE
COLOR PALETTE
ALL DEL MENU
Gamma
adjustment palette.
MENU
DEL
COLOR M .
41