Eiki LC-HDT700 Owner's Manual page 18

Installation
Attaching the lens to the projector
Turn off the projector and unplug the AC power
1
cord.
2
Fit the lens to the projector. Make sure that the
lens is fully inserted to the projector.
Push the Lens Lock Lever downward. Make
3
sure that the lens is properly locked.
4
Slide the light-block sheet in the groove to
mount.
5 While pressing the top cover release button on
the top cover, slide the top cover back to the
projector.
● Do not touch or remove any parts except the lens and related parts. It may result in malfunctions,
electrical shock, fire hazard or other accidents.
● Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the
projector.
● For details of the lens and installation, contact the sales dealer where you purchased the projector.
18
Groove
NOTES ON LENS INSTALLATION