Input Selection; Direct Operation - Eiki LC-HDT700 Owner's Manual

Side Control/Remote Control Operation
Side Control
* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for
switching input source. (p.53)
The input source changes each time you press the INPUT button on the side control or the remote
control as follows:
Input 1→ Input 2→ Input 3 → ...
Before using the INPUT button on the side control or the remote control, you must select a correct
input source by On-Screen Menu and the latest input source will be displayed.
Remote Control Operation
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on
the screen as you press each button. Select the connected input source.
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
HDMI
INPUT 3 button
Input 3
Video
y,Pb/Cb,Pr/Cr
S-video
32

Input Selection

Direct Operation

*
INPUT button
INPUT 2 button
Input 2
Video
y,Pb/Cb,Pr/Cr
RGB
Remote Control
INPUT button*
Remote Control
INPUT 1/2/3 buttons