User Instructions; Control Panel - Ariston NUOS FS 200 Instructions For Installation And Servicing

3.

USER INSTRUCTIONS

3.1 C P
ONTROL ANEL
F . 3.1 C P
IG A ONTROL
For Installer Menu operation refer
to 4.1.
ANEL
ON/OFF Button
Press to turn NUOS ON.
Press again to turn OFF.
Mode Button
Press to select mode either Auto, Boost and Green, Voyage, P1,P2 or
P1+P2 (if enabled).
Also press to exit from installer and information menus.
Control Knob - User
Turn knob clockwise to increase to desired set temperature.
Turn knob anticlockwise to decrease to desired set temperature.
Press and release knob and the current temperature of the water within
the tank will be displayed for 5 seconds.
Control Knob - Information Menu
Press and hold the knob for 5 seconds to display Information Menu.
Turn knob clockwise / anticlockwise to scroll through information
parameters L0 to L14.
Press knob at selected parameter and it's current value will be displayed.
Press knob again (or mode button) to return to Information menu.
IMPORTANT
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Once the NUOS unit has been fully commissioned, the
installer must give full guidance of use to the end user.
HP
set
AUTO
11
11