CognitiveTPG C Series Quick Start Manual page 3

Compact industrial printer

Hide thumbs Also See for C Series:

Table of Contents

Loading Media -- Standard Size Rolls:

NOTE: Before proceeding to Step 1, open the printer cover. Then follow Steps 2a or 2b depending on the media type

being used.

NOTE: Follow Steps 3a or 3b

depending on media type. For

Step 4, the media must be placed

UNDER the media guide bar, or

media wandering can occur.

NOTE: Once the guides are against

the sides of the roll, push the roll

down in the slot as shown. This

locks the media guide in the proper

position.

NOTE: Prior to loading media, take a moment to review media guides. They

are spring loaded to provide improved media control during printing. The

right media guide has a green locking tab which holds the guides in place.

Once the guide is set to the width of the media, it can be locked in place and

future loading of media is simplified.

Inward Wound Media

Outward Wound Media

Table of Contents

Cidz seriesCxdz seriesCitz seriesCxtz seriesCxd2Cxd4 ... Show all