Page 1
C Series Quick Start Guide Series Compact Industrial Printers “One Printer for your Entire Enterprise.” CognitiveTPG Headquarters 25 Tri-State International, Suite 200, Lincolnshire, IL 60069 Toll Free: 800-732-8950 Phone: 847-383-7900 Fax: 847-383-7949 www.CognitiveTPG.com Copyright 2009 CognitiveTPG. All Rights Reserved.
To learn more about CognitiveTPG approved media, please check out our new Online Media Selection Tool. For C Series technical support, please contact your local reseller or CognitiveTPG toll free at 800-732-8950, option 4, direct at 607-274-2500, option 4, or email support@CognitiveTPG.com.
Page 3
Loading Media -- Standard Size Rolls: NOTE: Before proceeding to Step 1, open the printer cover. Then follow Steps 2a or 2b depending on the media type being used. Inward Wound Media Outward Wound Media NOTE: Prior to loading media, take a moment to review media guides. They are spring loaded to provide improved media control during printing.
Page 4
Loading Media -- Standard Size Rolls (Cont’d): For thermal transfer printers, continue to the Loading Ribbon section of this Quick Start Guide. For direct thermal printers, go to the Self-Testing section of this Quick Start Guide. Loading Media -- Large Media Rolls: NOTE: Remove screws with a #2 Phillips screwdriver.
Page 5
Loading Media -- Large Media Rolls (Cont’d): Optional: CognitiveTPG provides 3” core adapters to work with all 3” core large media rolls. Please refer to the User’s For thermal transfer printers, continue to the Loading Ribbon Guide for more information regarding section of this Quick Start Guide.
Page 6
Self-Testing: For instructions on installing CognitiveTPG software and drivers, go online to the CognitiveTPG Website at www. CognitiveTPG.com/downloads_16.aspx. and follow the instructions under the Utility section. NOTE: The online C Series User’s Guide also has step-by-step instructions in Chapter 3 on installing and using the various software and driver packages.
Thermal transfer printers can operate in direct thermal or thermal transfer mode and must be set to the correct print mode for proper results. All C Series printers can use black bar, gap, or notch indexing. Continuous media may also be used. Label printing software provides the means to change the printer’s settings. See the software and network printing sections of the User’s Manual (located on the CognitiveTPG Website) for more details.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case user will be required to correct the interference at user’s own expense. WEEE: Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). For WEEE recycling and recovery Information, refer to the CognitiveTPG Web site. INDUSTRY CANADA NOTICE: This Class A digital apparatus complies with Canadian ICS-003 requirements.
This manual is also suitable for:
Cidz seriesCxdz seriesCitz seriesCxtz seriesCxd2Cxd4...
Show all
Need help?
Do you have a question about the C Series and is the answer not in the manual?
Questions and answers