PACKAGE CONTENTS: EZD42-2XX5-ZXP Models Only Ferrite bead to be installed on Parallel cable if used. Parallel cable not included. Connecting Power to the EZ-LP: CAUTION!: POWER OFF...
Connecting Data Cable: COM/SER I O I O Power OFF Power OFF Serial USB-B (DB9) (Device) ETHERNET PARALLEL Parallel (Centronics) Power OFF Power OFF Ethernet Ferrite Bead (Install on Parallel Cable as Shown) Self-Testing: Press FEED button while powering up Release FEED button when printing begins Power OFF to end test mode Power ON for normal operation...
You may need to refer to this information during the set-up process depending on the method you choose. Note: The EZ-LP ships with the default language emulation set to AUTO which means it will automatically set the language to EcPL for EPL emulation and ZcPL for ZPL emulation.
Page 6
“Printers” box, click “Next” 14. In the Use Existing Drivers window, choose “Keep existing driver (recommended)” and click “Next” 15. In the Name Your Printer window, type “EZ-LP” or the designation of your choice in the “Printer name:” field, click “Next”...
RTEL RTEL Port Number 9100 Warranty Information: Please register your printer to activate your warranty. Go to www.CognitiveTPG.com and click on Warranty Registration. Helpful Information: To learn more about CognitiveTPG printers and approved media, please contact your local reseller or CognitiveTPG: Website: www.CognitiveTPG.com...
If this equipment does cause interference, which can be determined by turning the equipment off and on, the user is encouraged to contact CognitiveTPG, Inc. immediately. CognitiveTPG, Inc. is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by CognitiveTPG, Inc.