Loading Media: Label roll Paper spindle Printhead Paper guide Printhead release Outward Wound Inward Wound Drive roller ON/OFF switch Thermal Transfer (TT) model shown. Printer is shown with media cover removed for clarity For direct thermal printers (LBDxx-xxxx-xxx), go to the “Connecting Data Cable” section of this Guide. For thermal transfer printers (LBTxx-xxxx-xxx), proceed to the “Loading Ribbon”...
Page 4
Loading Ribbon (continued): Lower printhead. Do not latch printhead mechanism Click!
Page 5
Advantage LX Communication Interfaces: 2” 4” SERIAL 9-PIN ETHERNET CENTRONICS (DTE Device) Parallel 1284-B NOTE: Interfaces shown apply to Advantage LX printers with S/N’s starting with “L” Connecting Data Cable: PARALLEL COM/SER ETHERNET I O I O Power OFF Power OFF...
Self-Testing: Press and hold the FEED button while Release FEED button when printing turning printer ON begins. Printer will conduct a self-test and print a configuration label Power OFF to end hexadecimal dump Power ON for normal operation mode Warranty Information: Please register your printer to activate your warranty.
Page 7
Note: To change printer settings, you can download the CognitiveTPG Printer Administrator Utility (see Downloading CognitiveTPG Printer Administrator below). Go to www.CognitiveTPG.com to download the detailed Advantage LX User Guide, Drivers, and other information. Downloading CognitiveTPG Printer Administrator In order to easily make printer configuration changes, install the CognitiveTPG Printer Administrator Utility. Follow the CognitiveTPG Printer Administrator installation instructions on http://www.CognitiveTPG.com/resources_utility.
Page 8
Jeffrey C Phoenix, Regulatory Compliance Engineer , CognitiveTPG and TPG IPB Ref #: 189-1300070 Rev D Copyright 2012 CognitiveTPG. CognitiveTPG and Advantage LX are trademarks of CognitiveTPG. Other products and corporate names used in this publication may be trademarks or registered trademarks of other companies and are used only for explanation and to their owner’s benefit, without intent to infringe.
Need help?
Do you have a question about the Advantage LX and is the answer not in the manual?
Questions and answers