Installing The Vodexl10 Video System - Wiring Diagram - Audiovox VODEXL10 Installation Manual

INSTALLING THE VODEXL10 VIDEO SYSTEM - WIRING DIAGRAM

1. Connect the dome light wires as shown on pages 10 and 11 of this
install manual.
2. Connect the wires of the 2 pin Power Harness to the vehicle's
electrical system by tapping into an accessory hot line and a good
ground. NOTE: This connection must be fused at the vehicle
connection point.
3. Connect the 2 pin connector on the Power Harness to the 2 pin
connector on the Power/Dome Light Harness. Plug the Power/
Dome Light harness into the unit in the location shown.
WIRING DIAGRAM
* 2 Pin FM Antenna
4. If connecting to an external source, plug in the 12 pin AV Input
Harness (P/N 112-4094) in the location shown. Connect RCA
cables (not supplied) to the external source's AV Output.
5. If connecting to a second screen AUX Input or head unit AUX
Input, plug in the 5 pin AV Output Harness (P/N 112-4260) in the
location shown and connect RCA cables (not supplied) to the AV
Input of the second screen or head unit.
6. Verify all system functions before permanently mounting the unit.
*NOTE: The antenna has been designed for optimal performance. When
installing the unit, position the antenna for best reception.
HDMI 2 Pigtail Harness (optional)
(HDIP1)
6 Pin Power/Dome Light Harness
(P/N 112-4254)
Dome Light
Power Source
12 Pin AV Input Harness
(P/N 112-4094)
5 Pin AV Output Harness
(P/N 112-4260)
Optional Relay Box FMDIRB
13
A/V Sources:
2 Pin
DVD / CD
Power Harness
USB Input
(P/N 112-3881)
HDMI1 Input
HDMI2 Input
Media (e.g. iPod, iPhone, iPad)
AV - Signal Harness (P/N 112-4094)
to the 3 RCA Jack Pigtail is used for
AV Input.
AUX - AUX Input
DTV
Game