4038-001
Park CCD module mode
This function parks the CCD module in the middle of the flatbed to
prevent damage to the CCD module during shipping. Perform this
function whenever the printer is to be shipped.
To park the CCD module:
1. Press Menu, #, 1, 9, 3, 4.
The LCD screen displays TECH.
2. Press Menu, and then Select.
3. Select Machine Test.
4. Select Move CCD.
The CCD module parks in the shipping position.
5. At this point, the printer can be powered off and packaged for
shipping.
Note: Once the power is turned back on, the CCD module
returns to a normal position.
6. To return the CCD module without powering off the machine, lift
the document cover and then lower document cover.
3-4
Service Manual