Motor, Fan, Solenoid Test - Lexmark X215 MFP Service Manual

4038-001

Motor, Fan, Solenoid test

This test checks the following components:
•
Main drive motor
•
Paper tray pick–up solenoid
•
Cooling fan
•
Main feed roller/bypass solenoid
•
Pre–transfer LED
To enter the Motor, Fan, Solenoid test:
1. Press Menu, #, 1, 9, 3, 1.
2. Select Diagnostic.
3. Press Select for Mtr Fan Sol.
Each component is listed one at a time. The first component
is the main drive motor.
4. To test the component, press 1.
5. To turn off the component test and proceed to the next
component test, press 2.
The test can be exited at any time by pressing Return.
Note: If a component was activated when Return is pressed,
that component remains activated while another test can run
concurrently.
6. Press Stop/Clear to exit the Diagnostic Test mode.
3-10
Service Manual