3. Diagnostic aids
Configuration modes
Clear All Memory mode
The Clear All Memory setting is used to reset all settings back to
factory defaults.
Note: Page counts are not reset when Clear All Memory is
performed.
To adjust Clear All Memory:
1. Press Menu, #, 1, 9, 3, 4.
The LCD displays TECH.
2. Press Menu, and then Select.
3. Select Data Setup.
4. Select Clear All Memory.
5. Select the country where the machine is located and press
Select to save the setting.
6. Press Return to go back to TECH screen.
7. Press Menu, #, 1, 9, 3, 4 to exit TECH mode.
4038-001
Diagnostic aids
3-1