Installation Requirements; Back Panel - Ubiquiti Edge Pro ERPro-8 Quick Start Manual

Back Panel

Mounting Holes
Note: There are additional ventilation holes on the sides
of the EdgeRouter PRO.

Installation Requirements

• Phillips screwdriver
• Standard-sized, 19" wide rack with a minimum of 1U height
available
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your outdoor networks
from the most brutal environments and devastating ESD
attacks with industrial-grade shielded Ethernet cable,
TOUGHCable
visit: www.ubnt.com/toughcable
Note:
the EdgeRouter PRO itself should be housed inside a
protective enclosure.
Ventilation Holes
, from Ubiquiti Networks. For more details,
™
Although the cabling can be located outdoors,
Fans
Mounting Holes
Power