Back Panel; Installation Requirements; Hardware Installation - Ubiquiti EdgeRouter PoE ERPoe-5 Quick Start Manual

Back Panel

Installation Requirements

• Drill with a 6 mm drill bit (for wall-mounting)
• Phillips screwdriver
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit:
www.ubnt.com/toughcable
WARNING:
do not expose the EdgeRouter to rain or moisture.
Note:
the EdgeRouter itself should be housed inside a
protective enclosure.

Hardware Installation

The EdgeRouter PoE can be placed on a desktop or mounted
to a wall or other surface.
WARNING:
MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF
CLEARANCE NEXT TO THE VENTILATION HOLES FOR
ADEQUATE AIRFLOW.
Ventilation Holes
To reduce the risk of fire or electric shock,
Although the cabling can be located outdoors,
FAILURE TO PROVIDE PROPER VENTILATION
Grounding Point
DC
GROUND
Power