Change The Network Setting - Eneo GLS-2101 Instruction Manual

5.1.3 Change the Network Setting

Please follow the steps below to change the network setting through the network if necessary.
l
Set the network options and IP address.
1. Click the Network button in the home page to enter the Network page.
2. A warning message
address or HTTP Port of network setting. Please restart the IE browser with the new IP
address or HTTP Port. Click "OK" to continue.
3. The accessible networks here are the "FTP", the "SMTP", the "SNTP", the "DDNS", the
"PPPoE" and the "IP Filter".
4. Fill in the "IP Address", "Netmask", "Default Gateway", "Primary Nameserver", and "HTTP
Port " if necessary.
5. Click the Submit button to submit the new network setting.
6. Click the Home button to return to the home page.
will appear: If you modify any IP
28