Table of Contents
Advertisement
l
Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1.
Click the Enable Alarm button on the left side of the record to enter the "Alarm Application
Enable Setting" page.
2.
Check / uncheck the trigger types of "Enable Alarm – Upload Via FTP".
3.
Check / uncheck the trigger types of "Enable Alarm – Save Into SD Card".
4.
Check / uncheck the trigger types of "Enable Alarm – Upload Via SMTP".
5.
Enter the "Alarm Duration" you have chosen.
6.
Click the Submit button to submit the new setting of the recording.
7.
Click the Home button to return to the home page.
Description of function keys:
Enable Alarm – Upload Via FTP: The alarm recording will be upload to the FTP when triggered.
Enable Alarm – Save Into SD Card: The alarm recording will be saved to the SD card when
Enable Alarm – Upload Via SMTP: The alarm recording will be upload to the SMTP when
Alarm Duration: Predetermines the length of the alarm. This setting will apply in the four channels.
triggered.
triggered.
53
Advertisement
Table of Contents
