Table of Contents
Advertisement
5.
List of cameras and its groups:
The users can use the icons above the
list to change the groups' names, the
devices' titles and the channels' display
modes.
6.
Display area: Click the title of the camera,
and you will see the live image in this
area.
7.
Device Recording: Click the "Start Record" button to start the recording mode and click
the "Config Record" button to set the details of the recording below.
8.
Status of the speed dome controller.
9.
You can interchange between two buttons here: the "Device Panel" and "Web page"
buttons.
The web page (please refer to section 5.1 for more details):
10.
Device information: The user can read a camera's information, such as "Site name",
"Group Name", "IP Address", "HTTP Port", "Device type", "Monitor Alarm Process" and
the " Connect Mode".
11.
Recording Scheduler: Shows the recording information of the selected channel.
79
Advertisement
Table of Contents
