Change Image Setting - Eneo GLS-2101 Instruction Manual

5.1.2 Change Image Setting

Please follow the steps below to change the image setting through the network if necessary.
1. Click the Image button on the home page to enter the image-setting page.
2. Adjust the image setting including "Device Title", "Channel Title", "Resolution", "Quality"
and "Mux/Quad" if necessary.
3. Click the Submit button to submit the new image setting.
4. Click the Fine Tune button to enter the Image Fine Tune page to set the details of the
device including: "Brightness", "Contrast' and "Saturation". Click the Default button to
reset the channel image settings.
NOTE: The revised image will appear immediately after any change in made.
26