Install The Eneo Gl-Manager In Your Pc - Eneo GLS-2101 Instruction Manual

5.2.2 Install the eneo GL-Manager in your PC

Install the eneo GL-Manager from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
automatically. Follow the on-screen instructions to proceed with the rest of the installation
procedure as they appear.
NOTE: It will update the .NET Framework to version 2.0 automatically. Please click "Accept"
to continue.
3. After the installation is complete, pop up the START menu from your computer, and point
to Programs / eneo GL-Manager / eneo GL-Manager to open up the program selection
page as shown below. Click the eneo GL-Manager tag to start the eneo GL-Manager
program.
Install the eneo GL-Manager for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated directory.
2. Open the extracted folder. The folder contains 1 file.
3. Click on the
instructions to proceed with the rest of the installation procedure.
4. After the installation is complete, click the START menu from your computer, and point to
Programs / eneo GL-Manager to start the eneo GL-Manager program.
NOTE: Please make sure the TCP/IP communication software has been properly set
and configured in your computer. To check your TCP/IP settings, please refer
to section 4.5 (TCP/IP configuration setting).
icon to execute the installation and then follow the on-screen
61