Eneo GLS-2101 Instruction Manual page 4

Network 1-channel video/audio server
Table of Contents

Advertisement

Safety Instructions / Maintenance
Read these safety instructions and the operation manual first before you install and
commission the unit.
Keep the manual in a safe place for later reference.
The system may only be commissioned and maintained by personnel authorized to do this
and it must only be carried out in accordance with relevant standards and guidelines.
Never cover the ventilation slots to avoid overheating.
Never insert metal objects or any other items into the vents. This may permanently damage
the unit.
Protect your unit from contamination with water and humidity to prevent it from permanent
damage. Never switch the unit on when it gets wet.
Have it checked at an authorized service center in this case.
Never operate the units outside of the specifications as this may prevent their functioning.
Do not operate the unit beyond their specified temperature, humidity or power ratings.
Operate the unit only at a temperature range of –10°C to +40°C and at a humidity of
max. 80%.
The unit should be protected against excessive heat, dust, damp and vibration.
Do not place any heavy objects on the unit.
To disconnect the power cord of the unit, pull it out by the plug. Never pull the cord itself.
Pay attention when laying the connection cable and observe that the cable is not subject to
heavy loads, kinks, or damage and no moisture can get in.
Do not attempt to disassemble the camera board from the dome.
Contact your local dealer in case of malfunction.
The connection cable should only be changed by Videor Technical.
The warranty becomes void if repairs are undertaken by unauthorized persons. Do not
open the housing.
Maintenance and repair have to be carried out only by authorized service centers. Before
opening the cover disconnect the unit from mains input.
Only use original parts and original accessories from Videor E. Hartig GmbH.
Do not use strong or abrasive detergents when cleaning the dome. Use a dry cloth to clean
the dome surface. In case the dirt is hard to remove, use a mild detergent and wipe
gently.
NOTE:
This is a class A digital device.
This digital device can cause harmful interference in a residential area; in this case the
user may be required to take appropriate corrective action at his/her own expense.
4

Advertisement

Table of Contents
loading

Table of Contents