Change The Network Setting - Eneo GLS-2301H Installation And Operating Manual

Description of function keys
Device Title: Type in the Video server title in the given space.
Resolution: MJPEG mode - Scroll to choose the image resolution from „35 * 40", "70 * 40" or
H.264 mode - Scroll to choose the image resolution from „Full D","Half D" or „CIF".
Quality: Scroll to choose the image quality out of a spectrum of qualities ranging from „highest", "high", „medium",
and „low" to „lowest".
Brightness: Enter your desired quality of image brightness from a spectrum of 0 to 55.
Contrast: Enter your desired quality of image contrast from a spectrum of 0 to 55.
Hue: Enter your desired quality of image hue from a spectrum of 0 to 55.
Saturation: Type in the saturation level in the blank (0 to 55).
: Back to the last page.
: Reload the page.
: Go to the next page.

6.1.3 Change the Network Setting

Please follow the steps below to change the network setting through the network if necessary.
• Set the network options and IP address.
. Click the Network button in the home page to enter the Network page.
. A warning message
network setting. Please restart the IE browser with the new IP address or HTTP Port. Click „OK" to continue.
"70 * 480" (NTSC); „35 * 88", „70 * 88„ or „70 * 576„ (PAL).
will appear: If you modify any IP address or HTTP Port of
5