Change Image Setting - Eneo GLS-2301H Installation And Operating Manual

6.1.2 Change Image Setting

Please follow the steps below to change the image setting through the network if necessary.
. Click the Image button on the home page to enter the image-setting page.
. Adjust the image setting including „Device Title" and „Viewer Type" if necessary.
3. Click the Submit button to submit the new image setting.
4. Click the Multi Profile button to enter the MultiProfile image-setting page. Select an ID (-6) from the drop-down
list then set its resolution and quality. Click the Submit button. Then you can exchange the pairs of resolution and
quality directly in the Home page.
3