Emergency Transmission; Conventional Operation; Scrambler Function; Stun Function - Icom IC-F43TR Instruction Manual

■ Emergency transmission

When [Emergency] is pushed and held for the specified
time period, the DTMF emergency signal is automatically
transmitted once or repeatedly on the emergency channel.
However, when no emergency channel is specified, the sig-
nal is transmitted on the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.

■ Scrambler function

The voice scrambler function provides private communi-
cation between stations. The frequency inversion type is
equipped to all versions, moreover, the optional Rolling or
Non-rolling type can be available.
q Push [Scrambler] to turn the scrambler function ON.
• " " appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.

CONVENTIONAL OPERATION

■ Stun function

When the specified code, set as a stun code, is received,
the stun function will be activated. When the stun code is
received, "STUNNED" appears on the display and the trans-
ceiver cannot be used. To use the transceiver, the stun re-
lease code must be received.
Also, if the transceiver's running time exceeds the preset
running time limit, the transceiver cannot be used. To use
the transceiver, extend the running time limit or turn the Run
Time Limit function OFF using the CS-F43TR
.
ware

■ Man Down transmission

When the optional UT-124
man down unit
Man Down function can be used. The Man Down function
transmits a man down emergency call after the specified
time period has passed with the transceiver in a horizontal
position.
6
-
cloning soft
is installed, the
17