Panasonic DX-800 Fax Manual page 82

Customizing Your Machine
Fax Parameter Table
No. Parameter
156 PRINT FORWARDED
DOCUMENT
157 TRANSACTION
158 PC REMOTE
159 SUBJECT LINE
160 DEFAULT DOMAIN
161 DNS SERVER
162 TIFF VIEWER URL
163 ROUTING HEADER
164 IFAX XMT HEADER
(Email only)
169 DHCP CLIENT
170
AUTHENTICATION
(See Note 3)
171 POP BEFORE SMTP
(See Note 3)
82
Setting
Number
*1
2
*1
JOURNAL
2
*1
UPDATE
2
*1
ENTRY
2
1
*2
1
*2
1
*2
3
*1
2
*1
2
1
*2
SMTP *1
2
*1
2
Setting
Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
Always
incomplete.
Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
Valid
Invalid Selecting whether the machine will accept commands from
an email application, to:
Valid
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
Invalid Selecting whether the "Subject" line can be programmed
during each transmission.
Valid
Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialing.
Valid
Invalid Selecting whether to use the DNS Server for the Internet
communication.
Valid
None Selecting whether to include the URL address in the email
message body.
English
English+
Japanese
Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed pages.
Valid
Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
Not Included
specified in the Default Domain parameter. (This is useful
when using the machine to scan documents back to your
PC)
Note: When sending to a Domain other than as specified
in the Default Domain parameter, the header will be
included regardless of the selection.
Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such as
Valid
IP Address, Subnet Mask, Default Gateway IP Address,
etc.)
Note: If you change the setting of this parameter, the
machine will reboot automaticaly.
Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication with a user name and
Valid
password before accepting email. After change the setting
to "Valid", you can enter the user name and password
assigned to your machine by your network administrator.
Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication by first retrieving incoming
Valid
email from the POP Server before accepting email.
(Please consult with your network administrator).
Comments