How To Load Documents - Panasonic DX-800 Fax Manual

How to Load Documents

1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
placed into the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 50 PAGES on the ADF at one time by staggering the documents as illustrated below. If you have
more than 50 pages, wait until transmission or storing in memory starts as pages feed through, place any
remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document(s) on the ADF.
CORRECT
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialing procedure.
ENTER STATION(S)
THEN PRESS START 00%
1. The multiple page sending limitation is as follows.
NOTE
Up to 20 pages
Up to 50 pages*
* Please note that although the size and thickness meets the specifications, you might not be
able to set 50 pages with some types of papers.
2. Transmitting documents longer than 14 in (356 mm) requires user's assistance.
3. When transmitting documents longer than Letter size (8.5 x 11 in), please extend the Sub Tray
as shown below.
Document Guides
Document Size
Up to 10.1 x 14.3 in (257 x 364 mm)
A4 or Letter size
Document Sub Tray
Loading Documents
INCORRECT
Document Thickness
0.0024 - 0.0048 in
0.0024 - 0.0039 in
85