Programming The Auto Dialer - Panasonic DX-800 Fax Manual
Internet fax guide
Hide thumbs
Also See for DX-800:
- Network fax manual (256 pages) ,
- Specifications (6 pages) ,
- Service manual (358 pages)
Table of Contents
Advertisement
Programming Email Address and Telephone Numbers
Programming the Auto Dialer
8
To record another number, repeat Steps 4 to 8.
To return to standby, press
1. If you require a special access number to get an outside line, enter it first and then press
NOTE
PAUSE
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. If you enter the Station name with the Fax Parameter 172 (DIRECT IFAX XMT) set to "Valid,"
you are allowed to select the usage of Direct IFAX XMT.
.
STOP
. A hyphen "-" is displayed for pause.
(represented by a "/"). The dialing method will be changed from Pulse to Tone after
ABBR[❚
]
ENTER ABBR NO.
71
Advertisement
Table of Contents
