A. Speaker
Please verify if the speaker mounted on the case is contacting with
on board speaker pin correctly. Otherwise, please follow the below
debugging procedure:
a. Speaker have no sound
1. Check the power +3.6V,
2. then check both side of R1024 and R1020 if there is any
high-low transaction
3. Check SPK_SHDN#(R1340) ,it should be high(2.8V).
4. if signal could be measured on SPKL, SPKR, but R1024,
R1020 have no signal,then U1003 ( Class-D Amp) NG,
change U1003.
We have found many speaker issue on this U1003 component
華
碩
電
腦
華
碩
電
腦
GTC ■ Service Manual
33