Bluetooth And Wlan Debug - Asus P552W Manual

3.6.2 Bluetooth and WLAN debug

The flow chart of Bluetooth and WLAN debug is shown below.
The purpose of Bluetooth and WLAN debug process is to find out
where the problem is on Bluetooth and WLAN path. In other words,
engineers can judge the defect component on RF path by using "BT
Debug tool" and "WLAN Debug tool".
Debug tool enforces GM2 BT or WLAN function into test mode
so that RF signal can be transmitted continuously. The usage of debug
tool and its related parameters are prescribed in the appendix.
華 碩 電 腦
華 碩 電 腦
GTC ■ Service Manual
82